|
Ficha Técnicas NoBreak TRIPP LITE 1500VA SMARTPRO1500 click aquí
Tiempo de Respaldo NoBreak TRIPP LITE 1500VA SMARTPRO1500 click aquí
Manual de Usuario NoBreak TRIPP LITE 1500VA SMARTPRO1500 click aquí
Link a la pagina del Fabricante click aquí
Tripp Lite's SMART1500 intelligent, line interactive
UPS system protects servers, networking accessories and telecommunications
equipment from blackouts, voltage fluctuations and transient surges. Large
internal batteries offer 20 minutes half load runtime and 7 minutes at full
load during power failures. 1500VA/980 watt power handling capability
supports a variety of networking, telecom and various other application
types, including the support of multiple network workstations. Includes a
total of 6 outlets, 1 of which can be individually powered on and off via
software interface to selectively reboot remote equipment or to
automatically shed less significant loads to extend battery runtime for more
critical equipment. Supports remote monitoring of UPS and site power
conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert
UPS monitoring and unattended shutdown software with complete cabling.
Supports SNMP with optional SNMPWEBSOLO external adapter. Built-in audible
alarm and 5 front panel LEDs indicate status of line power, battery power,
battery low/replace, voltage regulation and load level. Wall mountable with
optional UPSWM wallmount bracket. Network-grade AC surge suppression
protects equipment from damage and performance problems resulting from
transient surges. Attractive, small-footprint tower housing uses less than
66 square inches of floor or desktop space. Two year warranty with $250,000
connected equipment insurance (USA & Canada Only).
Key Features
* 1500VA/980 watt power handling capability supports a variety of
networking, telecom and various other application types
* Built-in voltage regulation and battery support, plus complete AC
suppression prevents equipment damage, data loss and downtime
* Large internal batteries offer 20 minutes half load runtime and 7 minutes
at full load during power failures
* Automatic Voltage Regulation (AVR) circuits with two boost and one voltage
reduction level maintains usable 120V nominal output over an input voltage
range of 75-147V
* Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually
powered on and off via software interface to selectively reboot remote
equipment or shed less significant loads to extend battery runtime for more
critical equipment
* Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS
status and site power conditions
* Communications ports enable safe unattended shutdown without data loss
during extended power failures
* Communications ports support messaging of UPS and line power status,
including on-battery, low-battery, power-restored, AC line voltage, DC
battery voltage and battery capacity
* Communications ports support timed inverter shutoff after unattended
shutdown, activate self-test and 10 second reboot of connected equipment
* PowerAlert UPS monitoring and unattended shutdown software with complete
cabling included
* Supports Tripp Lite's WatchDog software application to restore
unresponsive programs by automatically restarting them and rebooting
completely locked computers by automatically switching UPS power off and
back on again
* Notification of system status via 5 LEDs and multi-function audible alarms
* Wall mountable with UPSWM wallmount bracket
* Attractive small footprint beige tower housing uses less than 66 square
inches
* Hot-swappable/user replaceable batteries allow on-site battery replacement
* Cold start capability enables UPS turn-on in battery mode during blackout
conditions
* UL (USA), cUL (Canada), NOM (Mexico), Class A (Emissions)
* $250,000 Ultimate Lifetime Insurance (USA and Canada only)
* 2 year manufacturers product warranty with $250,000 connected equipment
insurance (USA & Canada Only)
Package Includes
* SMART1500 UPS System
* USB and DB9 monitoring cables
* PowerAlert unattended shutdown and UPS/Power monitoring software
* Instruction manual with warranty information
DESCRIPCIÓN NOBREAK TRIPP
LITE 1500VA SMARTPRO1500
OUTPUT
Output Volt Amp Capacity (VA) 1500
Output kVA capacity (kVA) 1.5
Output Watt Capacity (watts) 980
Output power factor 0.7
Nominal Output Voltage(s) Supported 120v
Frequency compatibility 60 Hz
Output voltage regulation (line mode) -18%, +8%
Output voltage regulation (Battery mode) +/- 5%
Built-in UPS output receptacles 6 5-15R outlet(s)
Built-in controllable switched load banks One switchable single-outlet 5-15R
load bank
Basic PDU options PDU1215 (1U / 13 5-15R outlets); PDUNV (1U / 2 C19, 12 C13
outlets); PDU1415 (0U / 14 5-15R outlets); PDUV15 (0U / 12 5-15R outlets)
Metered PDU options PDUMH15 (1U / 13 5-15R outlets); PDUMH15AT (1U / 8 5-15R
outlets)*; PDUMV15 (0U / 16 5-15R outlets)
Switched PDU options PDUMH15ATNET (1U / 8 5-15R outlets)*; PDUMV15NET (0U /
16 5-15R outlets)
External PDU redundancy options *Auto Transfer Switch features utilizing the
secondary PDU input cord are compatible with Smart Online UPS models only
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) PWM sine wave
INPUT
Rated input current (at maximum load) 12A
Nominal Input Voltage(s) Supported 120V AC
UPS input connection type 5-15P
Input circuit breaker 15A
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical Service 15A 120V
BATTERY
Full load runtime (minutes) 7 min. (980w)
Half load runtime (minutes) 20 min. (490w)
DC system voltage 36V DC
Battery recharge rate (included batteries) Less than 4 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement) RBC53
Battery Access Battery access door
Battery replacement description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Automatic voltage regulation (AVR)
maintains line power operation with an input voltage range of 75 to 147
Overvoltage correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction Input voltages between 93 and 107 are boosted by 14%
Severe undervoltage correction Input voltages between 75 and 92 are boosted
by 30%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload,
voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure, overload and low-battery
conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel
switch; once silenced, alarm will re-sound to indicate low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test
operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating 480
UPS AC suppression response time Instantaneous
EMI / RFI AC noise suppression Yes
PHYSICAL
Installation form factors supported with included accessories Tower
Installation form factors supported with optional accessories Wallmount (use
UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module dimensions in primary form factor (height x width x depth
/ inches) 12.8 x 7.5 x 9
UPS / Power Module dimensions in primary form factor (height x width x depth
/ cm) 32.4 x 19 x 22.9
UPS / Power Module weight (lbs) 38.4
UPS / Power Module weight (kg) 17.4
UPS Shipping dimensions (height x width x depth / inches) 18.2 x 12 x 13.8
UPS Shipping dimensions (height x width x depth / cm) 46.4 x 30.5 x 34.9
Shipping weight (lbs) 42.6
Shipping weight (kg) 19.3
UPS housing material PVC
Cooling method Fan
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40
degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees
Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 138.8
Battery mode BTU / hr. (full load) 454.4
COMMUNICATIONS
Communications interface USB; DB9 Serial
Network monitoring port description Supports detailed monitoring of UPS and
site power conditions
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot
restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to battery power (setpoint) 75
High voltage transfer to battery power (setpoint) 147
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) Cold-start
operation supported
High availability UPS features Hot swappable batteries
Green & high efficiency features Greater than 95% efficiency - GREEN UPS;
Individually controllable load banks
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to
NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Reduction of
Hazardous Substances)
WARRANTY
Product Warranty Period (U.S., Canada & Puerto Rico) 2 years
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000
connected equipment insurance
|