Especificaciones NoBreak Tripp Lite 3000VA SUINT3000RTXL3U click aquí

Link a la pagina del Fabricante click aquí

Tripp Lite's SUINT3000RTXL3U UPS System offers complete power conditioning and battery support for critical fileservers and internetworking equipment in a versatile 3U rack/tower configuration. Offers compatibility with 200/208/220/230/240V applications at 50/60Hz. Double conversion power conditioning process removes line noise, voltage fluctuations and frequency variations by converting incoming AC to DC, then back to universally compatible pure sine wave AC output. Standard internal batteries offer seamless support of connected equipment during power failures with zero transfer time. Support through extended power failures is available with the addition of 2U rack/tower compatible battery packs (BP72V15-2U limit 1/BP72V28-3U multi-pack compatible). Maintains continuous output over an input range of 160 to 275V without depleting battery reserves. Brownout support extends to 130V when loaded to 70% or less. Intelligent DB9 monitoring port works with included PowerAlert software and cabling for unattended shutdown and remote monitoring of UPS and site power conditions. Network accessory slot houses optional SNMPWEBCARD accessory for direct control and monitoring via ethernet. Includes 10 outlets total, 8 of which are arranged in two customized load management banks that can be remotely powered off and on via software interface to reboot locked equipment or extend battery runtime for more critical equipment by shedding non-essential loads. C20 input connection accepts a variety of detachable cordsets to match country- or site-specific wall receptacles. 3000VA/2400W power-handling ability with full CE rating and Class A EMI/RFI rating supports a wide range of fileservers and internetworking equipment, plus other sensitive loads requiring full-time power conditioning, regulation and battery support. Compatible with Tripp Lite's WatchDog system service software.
Key Features
* True online, double-conversion power conditioning offers enhanced, network-grade pure sine wave AC power for critical fileservers, internetworking equipment and sensitive electronics
* Maintains output within 2% of selectable 200/208/220/230/240V at 50/60Hz (+/-0.05Hz)
* Neutralizes frequency variations, fast electrical impulses, harmonics and other hard-to-solve power problems not addressed by other UPS types
* Versatile rack/tower format requires only 3 rack spaces (3U) in rackmount applications; included tower stand set supports upright configuration
* Maintains AC output at near-perfect levels even during long-duration brownouts as low as 160V and overvoltages to 275V without using battery power. Brownout support extends to 130V when loaded to 70% or less
* Set of internal batteries supports connected equipment during power failures for 14 minutes at half load (1500VA/1200W) and 5 minutes at full load (3000VA/2400W)
* Expandable battery runtime with the addition of external 2U or 3U rack/tower battery packs (#BP72V15-2U limit 1/BP72V28-3U multi-pack compatible)
* Intelligent DB9 monitoring port communicates site power and UPS status information including line power status, input voltage, battery status, load level and more—with full support for applications requiring basic contact closure power-fail and low-battery messaging
* FREE bundled PowerAlert software compatible with stand-alone and network operating systems offers unattended shutdown, remote monitoring and control of UPS system and connected equipment
* Slot for SNMPWEBCARD enables remote monitoring and UPS control via network management stations or web browser interface (#SNMPWEBCARD)
* Emergency Power Off (EPO) support available; contact Tripp Lite
* Includes 10 outlets (8 IEC320-C13 and 2 IEC320-C19) and one IEC320-C20-to-C19 interconnection cable (additional C13-to-C14 interconnection cables #P004-006 available )
* Two separate banks of individually controllable outlets enable remote reboot of locked network equipment without disrupting power to other loads; accessible via PowerAlert, NMS or enabled web browser—also supports automatic load shedding of non-essential items to extend battery runtime for critical equipment
* Compatible with Tripp Lite's WatchDog system service software
* Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
* Front panel LEDs and audible alarm provide notification of power status and full UPS status information
* From the same family as Tripp Lite's SmartOnline SU2200RT2U, named "Editors' Choice" by PC Magazine, Sept 25, 2001
* CE Certified
* 2-year manufacturer's warranty
Package Includes
* SUINT3000RTXL3U Rack/Tower UPS System
* PowerAlert Software and cabling
* 4 Post Rackmount installation flanges and adjustable depth mounting rails/or tower stands for upright tower configuration
* (2)6ft IEC320-C13 to IEC320-C14, (1)10ft. IEC320-C19 to IEC320-C20 AC interconnection cables
* Warranty information and instruction manual
 

DESCRIPCIÓN NOBREAK TRIPP LITE 3000VA SUINT3000RTXL3U
OUTPUT
Output Volt Amp Capacity (VA) 3000
Output kVA capacity (kVA) 3
Output Watt Capacity (watts) 2400
Output kW capacity 2.4
Output power factor 0.8
Crest Factor 3:1
Nominal Output Voltage(s) Supported 200v; 220v; 230v; 240v
Nominal Voltage details 230V default
Frequency compatibility 50 / 60 Hz
Frequency compatibility details Output frequency matches input nominal on startup, defaults to 50 Hz on cold-start
Output voltage regulation (line mode) +/- 2%
Output voltage regulation (Economy line mode) +/- 10%
Output voltage regulation (Battery mode) +/- 2%
Built-in UPS output receptacles 8 C13 outlet(s); 2 C19 outlet(s)
Included output power cables Includes 2 C13 to C14 output power cables
Built-in controllable switched load banks Two switchable four-outlet C13 load banks
Output circuit breaker 10A (x2) each breaker protects 4 C13 outlets, C19 is unbreakered
Basic PDU options PDUNV (1U / 2 C19, 12 C13 outlets)
Metered PDU options PDUMV20HV (0U / 6 C19, 32 C13 outlets)
Switched PDU options PDUMH20HVNET (1U / 8 C13 outlets); PDUMV20HVNET (0U / 4 C19, 24 C13 outlets)
PDU recommendation notes All noted SWITCHED and METERED PDUs require C19 to C20 input cable (P036-006 or similar)
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) Sine wave
INPUT
Rated input current (at maximum load) 14.9A (200V),14.3A (208V). 13.1A (220V), 12.6A (230V), 12.1A (240V)
Nominal Input Voltage(s) Supported 200V AC; 220V AC; 230V AC; 240V AC
UPS input connection type C20 inlet
Input circuit breaker 25A
BATTERY
Full load runtime (minutes) 5 min. (2400w)
Half load runtime (minutes) 14 min. (1200w)
Expandable battery runtime Supports extended runtime with optional external battery packs
External battery pack compatibility BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible)
DC system voltage (VDC) 72
Battery recharge rate (included batteries) Less than 6 hours from 10% to 80%
Replacement battery cartridge (internal UPS battery replacement) RBC53 (quantity 2)
Battery Access Front panel battery access door
Battery replacement description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Online, double-conversion power conditioning
Overvoltage correction 2% output voltage regulation during overvoltages to 275
Undervoltage correction 2% output voltage regulation during undervoltages to 156
Severe undervoltage correction 2% output voltage regulation during undervoltages to 130 (under 70% load only)
LEDS ALARMS & SWITCHES
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in rack/tower formats
Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating 480
UPS AC suppression response time Instantaneous
EMI / RFI AC noise suppression Yes
PHYSICAL
Installation form factors supported with included accessories 4 post 19 inch rackmount (mounting rail kit included)
Installation form factors supported with optional accessories 2 post rackmount (2POSTRMKITWM); Tower (2-9USTAND)
Optional mounting accessory notes Wallmount installation not recommended
Primary form factor Rackmount
UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 5.2 x 17.3 x 19.8
UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 13.2 x 43.9 x 50.3
Installed whole system total rack space height (rack spaces) 3U
Secondary form factor Tower (requires 2-9USTAND)
Installed whole system dimensions in secondary form factor (height x width x depth / inches) 17.3 x 5.2 x 19.8
UPS / Power Module weight (lbs) 74.9
UPS / Power Module weight (kg) 34
UPS Shipping dimensions (height x width x depth / inches) 13.3 x 23.8 x 25.8
UPS Shipping dimensions (height x width x depth / cm) 33.8 x 60.5 x 65.5
Shipping weight (lbs) 90.3
Shipping weight (kg) 41
UPS housing material Steel
Cooling method Fan
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 1219.3
AC economy mode BTU / hr. (full load) 520.9
Battery mode BTU / hr. (full load) 1328.4
AC economy mode efficiency rating (100% load) 94%
Audible Noise 47dBA At Front Side 1 Meter
COMMUNICATIONS
Communications interface DB9 Serial; Contact closure; Slot for SNMP/Web interface
Network monitoring port description Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications
PowerAlert software Included
Communications cable DB9 cable included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to battery power (setpoint) 160V (100% load), 130V ( <70% load)
High voltage transfer to battery power (setpoint) 275
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) Cold-start operation supported
High availability UPS features Automatic inverter bypass; Hot swappable batteries
Green & high efficiency features High efficiency economy mode operation
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CE (EU)
WARRANTY
Product Warranty Period (U.S., Canada & Puerto Rico) 2 years












 

Si usted encontró algo ambiguo, incorrecto o incompleto en esta descripción de producto háganoslo saber para poder mejorarla. Le responderemos sus preguntas a la mayor brevedad vía correo electrónico.