Product SKUs

MBD-X7DWA-N -O
X7DWA-N (Standard Retail Pack)
MBD-X7DWA-N -B
X7DWA-N (Bulk Pack)

Physical Stats

Form Factor
Extended ATX
Dimensions
13" x 12" (33.0cm x 31.0cm)

Processor/Cache

CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus
1600 / 1333 / 1066 MHz system bus

System Memory

Memory Capacity
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
Memory Type
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
512 MB, 1GB, 2GB, 4GB , 8GB**
Memory Voltage
1.8 V or 1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset
Intel® 5400 (Seaburg) chipset
ESB2
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B)
(Optional: AOC-SIMLP-3) with 3rd LAN support
NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
Network Controllers
Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Super I/O
Winbond 83627HG chip
Audio
ALC 883 High Definition 7.1 Channel Audio

Input / Output

Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
IDE
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
1 Floppy controller; 1.44 MB
LAN
2x RJ45 LAN ports
USB
4x USB rear ports
1x USB internal header
Total 5 USB 2.0 Compliant / 1.1 Compliant
Audio
High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Port / Header
1 Fast UART 16550 serial port
1 Serial header
Parallel Port
1 ECP / EEP parallel port
Firewire
2x IEEE 1394 ports (headers)


Chassis ( Optimized for X7DWA-N )

Tower / 4U Rackmount
CSE-743TQ-865
CSE-743T-645
Important Chassis Notes
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]

Expansion Slots

PCI-Express
2 (x16) PCI-e (Gen 2.0) slots
PCI-X
2x 64-bit 133MHz PCI-X (3.3V) slots
PCI
2x 32-bit PCI (3.3V) slots
UIO
1x UIO Slot

System BIOS

BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support

Management

Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep model
Power-on mode for AC power recovery
Suspend to RAM ( STR )

PC Health Monitoring

CPU
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of eight 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans (w/ speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PC temperature sensing logic
PECI
Thermal Monitor 2 (TM2) support
LED
CPU / System Overheat LED
Suspend-state indicator LED
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support

Operating Environment / Compliance
RoHS


RoHS Compliant 6/6, Pb Free
Environmental Spec.
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

Si usted encontró algo ambiguo, incorrecto o incompleto en esta descripción de producto háganoslo saber para poder mejorarla. Le responderemos sus preguntas a la mayor brevedad vía correo electrónico.